Information about our Cookie Policy

RENNER Kompressoren wishes to provide you with the best possible services. To this end, we store information about your visit in so-called cookies. By using this website you agree to the setting of cookies. For more details please consult our Privacy Policy

Compressor control systems RENNERlogic, RENNERtronic and RENNERtronic Plus

RENNERlogic: standard control system

RENNERlogic – a control that is both functional and simple with many benefits!


  • the start button starts up the compressor, the stop button makes the compressor go into shut off delay
  • emergency stop: the compressor switches off immediately in emergency situations
  • LED display: the compressor status is displayed by various flashing patterns
  • remote-indicating thermostat monitoring the temperature of the system
  • hour meter to easily monitor operating hours
  • pressure gauge and switch to check and control pressure
  • DIP switch to easily set the shut off delay and start up period
  • Modbus RTU, for example, to connect to a higher level control system



  • standard: terminals in the switching cabinet to connect an external on/off switch
  • standardised: potential free signals, fault and stand by messages
  • simplified: automatic restart after power failure by connecting an additonal board (90 seconds time delay)
  • option: the compressor can be turned off via an external signal


Standard equipment

  • RENNER screw compressors from 2.2 – 55.0 kW



RENNERtronic: The user-friendly basic control


Performance features

Pressure control within two adjustable pressure bands:
Customers can determine two pressure bands within limits set by the factory. Based on these pressure bands the compressor is controlled.

Capture of operating and load hours:
To identify uneconomical operation where load hours are highly variable.

Monitoring of adjustable maintenance intervals:
For different compressor components, such as air or oil filters, maintenance intervals can be programmed. A message appears when maintenance is due.

Fault memory:
The last ten messages stating the current operating hours are displayed on the control for diagnostic purposes.

Different code levels:
The menu system is protected from unauthorised changes by various code numbers (e.g. factory code, service code, customer code).

Base load change over function:
The control has a base load change over function that can be activated via the menu (additional module required).

Control of frequency converters: A PI control is integrated for controlling compressors with variable speed control. This control determines the rotating speed setpoint depending on the set pressure limit and transmits this to the converter as an analog signal (additional module).

Modbus RTU:
Serves, for instance, for the connection to a higherlevel control system or a building control system (Industry 4.0 Ready).



  • saves energy
  • safe operation of the compressor
  • controls and monitors the system
  • easy to use
  • greater reliability of operation
  • can be exhanced according to specific customer requirements
  • optional compressor monitoring


Standard equipment

  • starting with RS 75 in different versions
  • for all compressors with variable speed control
  • RS-PRO 2-30.0 – 55.0 D
  • Booster (RSM)


Optionally available for:

  • RENNER screw compressors from 2.2 – 55.0 kW
  • SL-S / SL-I 1.5 – 7.5

RENNERtronic Plus: The compressor control with additional functions


Performance features

The RENNERtronic Plus has all the functions of the standard RENNERtronic. And it can do even more!

Real-time clock:
All functions can be called up on the large display with real-time clock. The internal software has a timer with 7 channels.

Base load change over function:
This software comes with a base load change over function which will be connected via RS485 interface(modbus) to a maximum of 4 additional compressors.

The hardware also has additional features: RENNERtronic Plus has 11 digital inputs (the RENNERtronic has 5), 8 digital outputs (instead of 6), 1 analog input for a temperature sensor and 3 for pressure transducers and current transformers. Both analog outputs can be used without an additional module. Easier operation due to a larger display.

Monitoring of system pressure:
System pressure is monitored via a pressure transducer connected to the air end. The compressor only starts up after full discharge; shut off delay time can be controlled by system pressure. In addition, the controller checks whether the mains pressure is building up, for example to identify a belt break.



  • profibus connection


Standard equipment

  • SLM-S 7.5 – 30.0
  • water injected compressors (RSW)


Optionally available for:

  • starting with RS 75.0 in different versions
  • for all compressors with frequency converters
  • RS-PRO 2-30.0 – 55.0 D
  • Booster (RSM)
  • RENNER screw compressors from 2.2 – 55.0 kW
  • SL-S 1.5 – 5.5

The RENNER secret of success: Partnership, service-oriented, reliable and short lead times

Innovative strength and high quality standards, coupled with a consistent focus on customer needs and a good price/performance ratio – this is the key to RENNER's success. Once you have purchased a RENNER compressor, you can be rest assure that you will receive a compact, robust, reliable and energy-efficient product specially tailored to your needs. In addition, you can take advantage of a servicing network of well-trained partners worldwide. This not only applies to our area of expertise, screw compressors, but also to piston compressors and oil-free compressed air – made in Germany.

Energy efficiency: a matter of course for RENNER compressors

Whether frequency-controlled, with refrigeration dryer, mounted on a compressed air tank or as a complete compressed air station: energy efficiency is a matter of course at RENNER. All series work extremely cost-efficient.

RENNER has more than 6,000 customizable compressor models on offer. From the pressure level to the energy consumption  we adapt your compressor exactly to your needs.

We are the specialists for compressed air

Quality Made in Germany – that's RENNER! In 1994 Annette and Bernt Renner founded the company in Güglingen, Baden-Württemberg. What started out as a garage with three employees has since developed into an international company with over 160 employees.

RENNER compressors are manufactured with the most modern production processes in every size and finish. From small mobile piston compressors to large SCROLL and screw compressors for industrial installations – compressors from Güglingen are represented all worldwide. RENNER is since 2006 certified according to DIN EN ISO 9001.